Fluids / Propylene glycol, 20 % by volume
Specific heat of propylene glycol, 20 % by volume vs temperature
A 20 % by volume propylene glycol solution, freeze protection to about −7 °C — the corrosion floor: any leaner and the inhibitors are too dilute to trust.
Specific heat in kJ/(kg·K), from -5 to 100 °C. The chart and the table below are the same numbers; the table is the one you can copy.
| Density | 1,015.3 kg/m³ |
| Dynamic viscosity | 2.08 mPa·s |
| Thermal conductivity | 0.489 W/(m·K) |
| Temperature (°C) | Specific heat (kJ/(kg·K)) | Row |
|---|---|---|
| 0 | 3.928 | published |
| 10 | 3.949 | published |
| 20 | 3.97 | published |
| 30 | 3.992 | published |
| 40 | 4.013 | published |
| 50 | 4.035 | published |
| 60 | 4.056 | published |
| 70 | 4.077 | published |
| 80 | 4.097 | published |
| 90 | 4.116 | published |
| 100 | 4.135 | published |
Rows marked published land exactly on a source anchor and are the tabulated figure. The rest are this library’s interpolation between the two anchors either side: good enough to design with, and said out loud so you can decide that for yourself.
CoolProp (MIT licence), Melinder (2010) fit for aqueous propylene glycol, 20 % by volume taken as 20.6 % by mass; plain glycol and water, 1 atm · validated -5 to 100 °C · interpolated between 22 published anchors (values held, not extrapolated, past the ends)