Fluids / Propylene glycol, 40 % by volume
Specific heat of propylene glycol, 40 % by volume vs temperature
A 40 % by volume propylene glycol solution, freeze protection to about −21 °C — the middle charge — full winter protection at a manageable pumping penalty.
Specific heat in kJ/(kg·K), from -20 to 100 °C. The chart and the table below are the same numbers; the table is the one you can copy.
| Density | 1,037.4 kg/m³ |
| Dynamic viscosity | 4.59 mPa·s |
| Thermal conductivity | 0.384 W/(m·K) |
| Temperature (°C) | Specific heat (kJ/(kg·K)) | Row |
|---|---|---|
| -20 | 3.569 | published |
| -10 | 3.603 | published |
| 0 | 3.636 | published |
| 10 | 3.669 | published |
| 20 | 3.702 | published |
| 30 | 3.735 | published |
| 40 | 3.768 | published |
| 50 | 3.801 | published |
| 60 | 3.834 | published |
| 70 | 3.867 | published |
| 80 | 3.9 | published |
| 90 | 3.933 | published |
| 100 | 3.966 | published |
Rows marked published land exactly on a source anchor and are the tabulated figure. The rest are this library’s interpolation between the two anchors either side — good enough to design with, and said out loud so you can decide that for yourself.
Dow, Engineering and Operating Guide for DOWFROST and DOWFROST HD, SI tables, by volume; typical values for inhibited product · validated -20 to 100 °C · interpolated between 25 published anchors (values held, not extrapolated, past the ends)