Convert millimeter of mercury to foot of water column
1 mmHg = 0.04460334676 ft H₂O
| microbar | 1,330 μbar |
| barye | 1,330 Ba |
| millitorr | 1,000 mTorr |
| pascal | 133 Pa |
| millimeter of water column | 13.6 mmH₂O |
| pound per square foot | 2.78 lb/ft² |
| centimeter of water column | 1.36 cmH₂O |
| hectopascal | 1.33 hPa |
| millibar | 1.33 mbar |
| torr | 1 Torr |
| millimeter of mercury | 1 mmHg |
| inch of water column | 0.535 in w.g. |
| kilopascal | 0.133 kPa |
| foot of water column | 0.0446 ft H₂O |
| inch of mercury | 0.0394 inHg |
| pound per square inch | 0.0193 psi |
| meter of water column | 0.0136 m H₂O |
| decibar | 0.0133 dbar |
| kilogram-force per square centimeter | 0.00136 kgf/cm² |
| bar | 0.00133 bar |
| atmosphere | 0.00132 atm |
| megapascal | 0.000133 MPa |
| kip per square inch | 0.0000193 ksi |
| gigapascal | 1.33e-07 GPa |
| million pounds per square inch | 1.93e-08 Mpsi |
millimeter of mercury: The torr and the millimetre of mercury are not identical. The torr is defined as exactly 1/760 of a standard atmosphere, or 133.3223684... Pa, while mmHg is 133.322387415 Pa. They differ by about one part in seven million, which is irrelevant for blood pressure and can matter in precision vacuum metrology. Full definition →
foot of water column: Head in feet of water is only equal to pressure when the fluid is water. A centrifugal pump develops a head in feet that is nearly independent of fluid density, but the pressure it produces is proportional to density, so pumping a fluid of specific gravity 1.3 gives 30 percent more pressure for the same head. Also check the reference temperature: values quoted at 39.2 °F, 60 °F and 68 °F differ in the fourth digit. Full definition →
Multiply by 0.04460334676 to go from millimeter of mercury to foot of water column, or divide by it to go back. Every conversion on this site routes through the SI value (Pa) rather than a table of pairwise factors, so a round-trip returns exactly what you started with.
Going the other way? foot of water column to millimeter of mercury: 1 ft H₂O = 22.41984229 mmHg.
| 1 mmHg | 0.044603347 ft H₂O |
| 2 mmHg | 0.089206694 ft H₂O |
| 3 mmHg | 0.13381004 ft H₂O |
| 5 mmHg | 0.22301673 ft H₂O |
| 10 mmHg | 0.44603347 ft H₂O |
| 15 mmHg | 0.6690502 ft H₂O |
| 20 mmHg | 0.89206694 ft H₂O |
| 25 mmHg | 1.1150837 ft H₂O |
| 50 mmHg | 2.2301673 ft H₂O |
| 75 mmHg | 3.345251 ft H₂O |
| 100 mmHg | 4.4603347 ft H₂O |
| 250 mmHg | 11.150837 ft H₂O |
| 500 mmHg | 22.301673 ft H₂O |
| 1000 mmHg | 44.603347 ft H₂O |